Business and Markets

Forecast SummariesCharts 1 and 2 are the recent world growth forecasts for this year and next for GDP (World Bank), Electronic Equipment and Printed Wiring Boards (Custer Consulting Group), Semiconductors (SIA/WSTSI and new Semiconductor Capital Equipment (SEMI). The semiconductor-related sectors are clearly outgrowing the rest of the supply chain. These forecasts require regular review considering the current global political uncertainty and potential industry output and trade disruptions.Updates to these forecasts are regularly available.Taiwan Wafer Fab SalesComposite sales of 14 Taiwan-listed wafer fabs including TSMC and UMC dipped sharply in June. This sales composite has been historically a useful leading indicator for global semiconductor shipments (Chart 3). If wafer fab sales remain weak, they may signal an imminent chip slowdown. These data are updated monthly.Wafer Fab, Semiconductor and SEMI Capital Equipment Business CyclesChart 4 compares the 3/12 growth of global semiconductor and semiconductor capital equipment to Taiwan-listed wafer fabs. Watch this information over the next few months to see if the wafer fab dip is temporary or leads semiconductor and SEMI equipment down to slower growth. Walt Custer of Custer Consulting Group is an analyst focused on the global electronics [email protected]

Driven by the adoption of evermore electronic components in end products, the semiconductor industry is facing a new era in which device scaling and cost reduction will no longer continue on the path followed for the past few decades. Advanced nodes no longer bring the desired cost benefit, and R D investments in new lithography solutions and devices below 10nm nodes are rising substantially. In order to satisfy market demands, the industry is looking for technology solutions to bridge the gap and improve cost/performance while at the same time adding more functionality through integration.More than-Moore devices (including MEMS and sensors, CMOS Image Sensors, power electronic, along with RF devices) represent this new functional diversification of technologies, combining performance, integration and cost not limited to CMOS scaling, and their importance will become more and more preponderant.In 2017, wafer demand for More than Moore devices1 reached almost 45 million 8-inch eq. wafers. This figure is expected to reach more than 66 million 8-inch eq wafers by 2023, showing an almost 10 percent growth during this period.This increase is supported by the famous megatrends detailed in the new analysis, Wafer Starts for More Than Moore Applications2, performed by Yole Développement (Yole). This analysis is relevant to the following markets: 5G with wireless infrastructure and mobile segments, mobile including additional functionalities, voice processing, smart automotive and electrification, AR/VR3, and AI4.For the first time, the market research and strategy consulting company presents a dedicated technology and market analysis focused on the overall wafer demand for More than Moore devices. The aim of this report is to give an overview of wafer shipments for More than Moore devices, from wafer size to semiconductor material substrate type including silicon, glass, SOI5, SiC6, SiGe7, GaN8, InP9, GaAs10, sapphire and ceramic, and thus identify business opportunities in the More than Moore industry.For over 20 years, Yole has been analyzing the industry evolution, discussing with leading companies to understand market challenges, and identifying technical breakthroughs. The Wafer Starts for More Than Moore Applications report is the result of this 20-year research. Yole’s analysts combine technical and market expertise to describe the More than Moore world. Market size (volume and value), substrate sizes and formats, value chain, technology processes and market drivers, business opportunities and competitive landscape are all part of Yole’s analysis.The various research teams at Yole, encompassing power electronics, imaging and sensing, RF and semiconductor manufacturing, collaborate to present an in-depth understanding of the current market evolution, taking into account innovations and emerging businesses. This methodology allows Yole to cover the overall megatrends and illustrate the links between wafer substrate, device, module, sub-system, system and high-end product.Under this dynamic ecosystem, the deployment of renewable energy sources and industrial motor drives as well as the electrification of the automotive industry are good examples of the impact of megatrends on the semiconductor industry development. They are directly impacting the power devices’ wafer market, resulting in an expected 13 percent CAGR between 2017 and 2023. Already in 2017, this market represented more than 60 percent of the overall wafer market for More than Moore devices, and is currently still dominating the More than Moore industry.5G is one megatrend driving wafer demand. 5G is leading the More than Moore evolution, bringing any service to any user, anywhere. Antennas and filtering functionalities are two of the key innovations of this evolution.Without doubt, the stringent requirements of 5G are driving increasing demand for RF components like RF filters, power amplifiers (PAs), and low-noise amplifiers (LNAs) to ensure access to tomorrow’s radio network.This year, Corning and Menlo Micro announced a major agreement to develop a DMS[11] product platform. Both partners propose an innovative approach based on TGV12 packaging technology. According to both partners, this technical choice allows them to cover operation of frequencies beyond 50GHz. Amongst the numerous megatrends, mobility is not far behind 5G. Demand for advanced mobile applications integrating more and more functionality is growing. In order to compete companies are developing smart combinations of devices such as fingerprint sensors, ambient light sensors, 3D sensing, microphones, and inertial MEMS devices. As an example, impressive developments focused on SOI-based NIR sensors have been released by SOITEC for front-side imager applications including advanced 3D image sensors. This technical evolution will clearly contribute, in the near future, to strong growth of the wafer market for MEMS and sensors. Additionally, the automotive industry, with the development of smart cars, has reached a new level of complexity requiring the development and integration of new sensors. In this context, many companies are aiming to extend their capabilities in ADAS13 and autonomous driving. Recently the leading company On Semiconductor acquired SensL Technologies, the leader in SPAD and LiDAR sensing products for automotive. This acquisition is one sign among many highlighting the evolution of this historic industry, searching for new expertise and welcoming new players, more aware of consumer habits and needs.Yole’s analysts expect smart automobiles to drive consistent growth of CIS14 and sensor wafer production over the next five years. It is fueled by the increasing integration of high-value sensing modules like RADAR, imaging, LiDAR and more. Although automotive will be mainly supported by these growth areas, historic MEMS and sensors such as MEMS pressure sensors and inertial MEMS will continue growing at a reasonable rate, supporting the standard automotive world.Yole Group of Companies including Yole, System Plus Consulting, KnowMade, PISEO and Blumorpho follows and analyzes the industry continuously. The Group has developed in-depth expertise and knowledge focused on the semiconductor manufacturing process and markets. Companies of the Group work together to understand the technical issues, identify business opportunities and propose valuable analyses.Yole invites you to an overview of the Wafer Starts for More Than Moore Applications report during the exclusive online event, titled “Wafer Starts for More than Moore Applications – Webcast”. This hourlong webcast takes place on June 28 at 5:00 PM CEST. The market research company will present key results of this report including megatrends, wafer market evolution and technical trends. Moderated by David Jourdan, Sales Coordination Customer Service at Yole, it welcomes the two leading companies, SPTS (an Orbotech Company) and Corning Precision Glass Solutions: "Trends in Wafer Processing Technologies for RF MEMS" – Speaker David Butler, Executive Vice President and General Manager at SPTS Technologies "Benefits of Through Glass Vias for RF applications" – Speaker: Ravij Parmar, New Product Development Manager for Corning Precision Glass Solutions These results will be also presented by the Semiconductor Software team at SEMICON West (Booth #1320), SEMICON Taiwan and SEMICON Europa (Booth #A-4667). Make sure to meet Yole’s analysts and get a valuable overview of the More than Moore industry. Agenda and more information are available on i-micronew.com. Stay tuned!About the authors:Amandine Pizzagalli is a Technology Market Analyst, Equipment Materials - Semiconductor Manufacturing - at Yole Développement (Yole). Amandine is part of the development of the Semiconductor Software division of Yole with the production of reports and custom consulting projects. She is in charge of comprehensive analyses focused on semiconductor equipment, materials and manufacturing processes. Emilie Jolivet is Director of the Semiconductor Software Division at Yole Développement, part of Yole Group of Companies, where her specific interests cover package assembly, semiconductor manufacturing, memory and software computing fields. 1 Including: MEMS sensors, CIS, and power, photonics and RF devices2 Yole Développement, March 20183 AR/VR : Augmented Reality/Virtual Reality4 AI : Artificial Intelligence.5 SOI : Silicon On Insulator6 SiC : Silicon Carbid7 SiGe: Silicon Germanium8 GaN: Gallium Nitride9 InP: Indium Phosphide10 GaAs : Gallium Arsenide111 DMS : Digital-Micro-Switch12 TGV : Through Glass Via13 ADAS : Autonomous Driving Assistance Service14 CIS : CMOS Image Sensor

Powerful winds of change are re-shaping the semiconductor industry as it flexes and re-positions to power a new wave of growth on the back of emerging applications. Today, the industry is thriving, with growth expected to continue through 2019 even as Moore’s Law – the trusty doubling of transistors roughly every two years – begins to pump the brakes. Product mix and production technology are shifting as the dominant smartphone and PC markets, having seen their growth peaks, start to give way to large markets with relatively low semiconductor penetration, such as automotive.What’s more, new potentially ubiquitous technologies and platforms such as AI, blockchain and smart manufacturing are redefining market dynamics and the semiconductor ecosystem that underlies them.Troublingly, the most significant threats to the continued growth of the semiconductor industry are not of its own making. Macroeconomic trends and trade policy disputes loom.These were some of the key takeaways from the SEMI Market Symposium kicking off SEMICON West in San Francisco this week. Following is a deeper look.Semiconductor MarketThe consensus view, reflected in forecasts presented by Clark Tseng of SEMI and Bob Johnson of Gartner, is that the semiconductor industry could top $500 billion in 2019 after reaching $400 billion in 2017. According to Gartner, smartphones and PCs will continue to account for large parts of the market, but will be displaced as major drivers of market growth by the emergence of industrial, automotive and, to a lesser extent, storage, from 2017 to 2022. Johnson noted that while communications and data processing applications drive logic device demand, average sales prices (ASPs) are a bigger contributor to revenue growth than unit growth.Leading-edge processors are a big part of the ASP picture, with equipment costs increasing ~20 percent per node. One challenge is that as Moore’s Law loses steam, leading logic producers are increasingly going their own way with new production technology. The volatile DRAM market – now in a “super cycle,” according to Tseng, and expected to peak in 2019 – has been stoking memory market growth.Initially, supply shortages fueled memory price increases as three of the four leading memory makers invested in flash rather than DRAM capacity. However, memory prices have been more recently been lifted by technology complexity, particularly as DRAM has moved to 3D architectures. The good news is that pricing, at long last, appears to be driven by value.Automotive MarketWith automotive accounting for less than 10 percent of semiconductor demand, there is room for growth. Rudy Burger of Woodside Partners noted that while the end market for automobiles is growing slowly, at 3 percent CAGR, the market size is nearing 100 million units. In market segments such as electric vehicles, the semiconductor content exceeds $1,000 but can be much higher.For example, the BMW i3 sports over $4,000 in semiconductor content. Burger said connectivity, autonomous driving and shared mobility services are also key opportunities for semiconductors to deepen their penetration in automobiles. For instance, the auto market for cameras, is expected to grow from $2 billion in 2017 to $6 billion in 2022.On average, high-end vehicles feature over $1,000 in semiconductor content, whereas low-end vehicles hover in the $400 range, said Anand Srinivasan of Bloomberg. Because the automotive market is segmented by function or subsystem, with different suppliers focusing on different areas, there is little supply concentration. Srinivasan also pointed out that because of significant differences in their objectives, automotive safety and automation systems should be developed separately.BlockchainThe chief benefit of blockchain is the trust it begets among all parties to a digital transaction through four fundamental features, said David Treat of Accenture: The tracking of provenance (knowing who has touched data, and what has happened to it) Tamper evidence (knowing if someone has tried to change the data) Control (which data elements to share with which parties) Security at the data element level While most of the hype over blockchain focuses on tokenized assets and ledgers (bitcoin and other cryptocurrencies), the fundamental application in the semiconductor industry is sharing trusted access to reference data at the data element level. This ability to provide shared trust can reduce costs throughout the supply chain and across enterprises. For example, future blockchain implementations will offer a full ecosystem view to any supply chain participant. While blockchain has typically been deployed through centralized control or platforms, peer consortia, such as SEMI, could help weave the benefits of blockchain through various ecosystems by enabling equipment and material suppliers, device manufacturers, designers and system integrators to share business and technical information securely and, if desired, anonymously.Global and Macroeconomic TrendsThe biggest threats to the continued growth of the semiconductor industry are exogenous. After a decade of steady recovery since the financial crisis, the global economy appears to be heading for a slowdown. Duncan Meldrum of Hilltop Economics made the case that the global economy is at or just past the peak of the business cycle, and semiconductor equipment is past the peak.A key indicator of a looming recessionary is the movement toward an inverted yield curve, in which long-term interest rates fall below short-term rates – a phenomena that could materialize this year or next.The increasingly heated trade climate, marked by high-stakes confrontations between the U.S. and China, threatens complex supply chain arrangements, though mercurial policy statements could do even more harm than stiffer trade tariffs. Underscoring competing interests between the U.S. and China and the unpredictability of their relations, Robert Maire of Semiconductor Advisors pointed out that, in 2019, 60 percent of all semiconductors are expected to be used in China, deepening the dependency of several U.S. semiconductor companies on China.Paul Semenza, for SEMI Industry Research and Statistics

Device manufacturers continue to invest. Spending in cloud data center (compute, networking and storage), automotive (content per car increases), industrial (on content, factory automation, and positive macro trends), and consumer (gaming) end-markets is particularly strong. We see capital expenditure growth in 2018 and early indications pointing to sustainable spending into 2019. We also expect 14 percent increase (YoY) for fab equipment spending in 2018, up from the February forecast of 9 percent, and expect 9 percent increase in 2019, adjusted from the February forecast of 5 percent. 92 future facilities/lines with various probabilities are scheduled to start production in 2018 or later. Fab investment is just one indicator of how growing demand in areas such as from Artificial Intelligence (AI), cloud/data storage, automotive and Internet of Things (IoT) is driving unprecedented spending in the semiconductor industry. Below are a few highlights* of recent SEMI FabView insights. Details of each project can be found in FabView online 24/7 or World Fab Forecast report (Excel format). Infineon’s new 300mm Fab in Austria - Infineon is planning a new 300mm thin wafer Fab for Power Devices in Villach, Austria. Rumors on Toshiba’s new Fab plans - More 3D NAND fabs in the future at Toshiba are feasible. The timing will depend on market conditions, and our forecast will adjust accordingly. Vanguard's possible 300mm foundry fab - Vanguard's management said it might buy or build a 300mm fab in the near future as all 200mm fabs are essentially full. Powerchip plans to build new memory fab in Taiwan - Powerchip is investing more in expansions since Memory pricing is holding up. Rohm announced to build a new SiC fab in Fukuoka Japan - Rohm announced its plans to build a new SiC fab. Micron is building a new fab in Singapore - Micron broke ground in a ceremony for a new fab in Singapore on April 4, 2018. Bosch had groundbreaking ceremony of their 300mm fab in Dresden end April 2018 - Investment of 1 billion Euro. This is the biggest single investment in Bosch’s 130-year history. SEMI FabView, a mobile-friendly, interactive version of SEMI’s popular World Fab Forecast, delivers on-demand fab information such as fab spending and capacity for over 1,100 facilities, including over 82 planned facilities worldwide, across a wide range of product segments including Power, GPU, Memory, Foundry, MEMS and Sensors fabs. Fab data include region, start of construction, operation, construction and equipment spending, capacity, wafer sizes, product types and geometries. SEMI FabView subscribers receive forecast model updates through SEMI’s World Fab Database. Click here for a trial to experience SEMI FabView first hand. *Actual updates provide more detail Christian G. Dieseldorff and Clark Tseng, Industry Research Statistics Group, SEMI.

Updated Global GDP ForecastThe World Bank just updated its multiyear forecast for GDP growth both globally and by country (Chart 1).It noted: “Despite recent softening, global economic growth will remain robust at 3.1 percent in 2018 before slowing gradually over the next two years, as advanced-economy growth decelerates and the recovery in major commodity-exporting emerging market and developing economies levels off.“This outlook is subject to considerable downside risks. The possibility of disorderly financial market volatility has increased, and the vulnerability of some emerging market and developing economies to such disruption has risen. Trade protectionist sentiment has also mounted, while policy uncertainty and geopolitical risks remain elevated.”www.worldbank.orgSemiconductor Growth Outlook Strong (Chart 2)The WSTS updated its world semiconductor shipment forecast. This new forecast (endorsed by SIA) projects worldwide semiconductor sales will be a record $463 billion in 2018, a 12.4 percent increase from 2017. WSTS projects year-to-year increases across all regional markets for 2018.This revised semiconductor forecast coupled with very robust global semiconductor capital equipment sales (Chart 3) paint a positive outlook for 2018.www.semiconductors.orgsemi.huihuidehui.workers.devVery Strong End Market Growth in First Quarter (Chart 4)Based upon the combined 1Q’18 financial reports of 213 large, global OEMs, electronic equipment sales (consolidated into U.S. dollars) increased globally an estimated (and very robust) 10.6 percent in 1Q’18 vs. 1Q’17. While this world growth result is very heartening it was significantly inflated by exchange rate effects as stronger non-dollar currencies were converted into weaker dollars. Looking at world electronic equipment sales consolidated into both dollars and euros, 1Q’18 growth rates are MUCH different (Chart 5). 1Q’18 vs.1Q’17 electronic equipment sales grew 10.6 percent in dollars but declined 4.3 percent in euros! Certainly the first quarter was strong globally but the currency chosen for analysis can have a BIG effect.U.S. Supply Chain Expansion ContinuesLooking at the U.S. market (in dollars - therefore not distorted by exchange rates) domestic electronic equipment orders rose 6.7 percent in February-April 2018 versus the same three-month period in 2017. The U.S. electronic industry is doing reasonably well at present.www.census.gov/manufacturing/m3/Expect the recent exchange rate based amplification of dollar denominated global growth to taper off quickly.Keep a careful watch on the geopolitical situation.Walt Custer of Custer Consulting Group is an analyst focused on the global electronics [email protected]

Christian G. Dieseldorff, Industry Research Statistics Group, SEMI (June 12, 2018)The semiconductor industry is nearing a third consecutive year of record equipment spending with projected growth of 14 percent (YOY) in 2018 and 9 percent in 2019, a mark that would extend the streak to a historic fourth consecutive growth year, according to the latest update of the World Fab Forecast report published by SEMI. The industry last saw four consecutive years of equipment spending growth in the mid 1990s.Korea and China are leading the growth, with Samsung dominating global spending and ascendant China on a fast, steep rise, surging ahead of all other markets. See figure 1.Figure 1: equipment spending by region (includes new and refurbished)Samsung is expected to reduce equipment investments in 2018. Despite the ebb, the company still accounts for a dominant 70 percent of all investment in Korea. At the same time, SK Hynix is increasing its equipment spending in Korea.China’s equipment spending is forecast to jump a whopping 65 percent in 2018 and 57 percent in 2019. Notably, 58 percent of investments in China in 2018 and 56 percent in 2019 stem from companies with headquarters in other regions such as Intel, SK Hynix, TSMC, Samsung, and GLOBALFOUNDRIES. Domestic, Chinese-owned companies – backed by large government initiatives – are building an impressive number of new fabs that will start equipping in 2018. The companies will double their equipment investments in 2018 and again in 2019.Meanwhile, other regions are also ramping up investments. Japan is beefing up equipment spending by 60 percent in 2018, with the largest increases by Toshiba, Sony, Renesas and Micron.The Europe and Mideastern region will boost investments by 12 percent in 2018, with Intel, GLOBALFOUNDRIES, Infineon and ST Microelectronics as the largest contributors. Southeast Asia will increase investments by more than 30 percent in 2018, although total spending is proportionately smaller than in other regions owing to its size. The main contributors are Micron, Infineon and GLOBALFOUNDRIES, though companies including OSRAM and ams are also increasing investments.The SEMI World Fab Forecast, which also includes information on other companies, covers data and predictions through the end of 2019, including milestones, detailed investments by quarter, product types, technology nodes and capacities down to fab and project level.Learn more about the SEMI fab databases at:semi.huihuidehui.workers.dev/en/MarketInfo/FabDatabase and www.youtube.com/user/SEMImktstats.

Years of industry consolidation in the critical subsystems market appears to be coming to an end.The top 10 suppliers’ share of the critical subsystems market has stabilised at around 50 percent after many years of industry consolidation. Through a combination of acquisitions and organic growth, this percentage has been increasing steadily from 38 percent at the turn of the millennium. However, in recent years the trend has slowed considerably as medium and smaller sized suppliers are starting to provide stiffer competition for incumbents. Driven by a number of factors, consolidation produces a number of benefits that accrue to the resulting larger suppliers, including the following: Economies of scale Combined research and development budgets Improved access to global markets through strategic regional acquisitions Stronger financial backing that can facilitate any required rapid scale up in production For their part, buyers must rely on a smaller pool of larger suppliers and face these downsides: Less innovation Less flexibility In some cases, dependency on a single supplier for a particular subsystem that can lead to supply chain bottlenecks Until 2014, the balance was clearly in favour of consolidation, but since then the trend has stalled and there is strong evidence that over the next few years the trend may even revert, favouring medium and smaller sized suppliers. The current industry upswing has already allowed these companies, versatile and nimble enough to quickly develop and deliver innovative solutions, to gain market share from overstretched incumbents. What’s more, OEMs and chipmakers, increasingly concerned about having to rely on a single or dominant source for their most critical subsystems, are effectively imposing a spending cap with some large suppliers while collaborating with medium and smaller sized suppliers and encouraging them to step up.The data supporting these observations suggests that the main beneficiaries are companies ranked between 11th and 30th in size, with many of these organizations’ market share growth slightly outpacing that of the top 10 in recent years.For more information about VLSI Research and Critical Subsystems, visit www.vlsiresearch.com. Julian West is a technical and marketing analyst at VLSI Research Europe.

Broad Global U.S. Electronic Supply Chain GrowthThe first quarter of this year was very strong globally, with growth across the entire electronics supply chain. Although Chart 1 is based on preliminary data, every electronics sector expanded – with many in double digits. The U.S. dollar-denominated growth estimates in Chart 1 have effectively been amplified by about 5 percent by exchange rates (as stronger non-dollar currencies were consolidated to weaker U.S. dollars), but the first quarter global rates are very impressive nonetheless. U.S. growth was also good (Chart 2) with Quarter 1 2018 total electronics equipment shipments up 7.2 percent over the same period last year. Since all the Chart 2 values are based on domestic (US$) sales, there is no growth amplification due to exchange rates.We expect continued growth in Quarter 2 but not at the robust pace as the first quarter.Chip Foundry Growth ResumesTaiwan-listed companies report their monthly revenues on a timely basis – about 10 days after month end. We track a composite of 14 Taiwan Stock Exchange listed chip foundries to maintain a “pulse” of this industry (Chart 3).Chip foundry sales have been a leading indicator for global semiconductor and semiconductor capital equipment shipments. After dropping to near zero in mid-2017, foundry growth is now rebounding.Chart 4 compares 3/12 (3-month) growth rates of global semiconductor and semiconductor equipment sales to chip foundry sales. The foundry 3/12 has historically led semiconductors and SEMI equipment and is pointing to a coming cyclical upturn. It will be interesting to see how China’s semiconductor industry buildup impacts this historical foundry leading indicator’s performance. Passive Component Shortages and Price IncreasesPassive component availability and pricing are currently major issues. Per Chart 5, Quarter 1 2018 passive component revenues increased almost 25 percent over the same period last year. Inadequate component supplies are hampering many board assemblers with no short-term relief in sight.Peeking into the FutureLooking forward, the global purchasing managers index (a broad leading indicator) has moderated but is still well in growth territory.The world business outlook remains positive but requires continuous watching!Walt Custer of Custer Consulting Group is an analyst focused on the global electronics industry.

Can it be that no more new semiconductor fabs are being built in the U.S.?The last new volume fab known is Micron’s Building 60 in Utah, according to the SEMI World Fab Forecast report published in February 2018. The catch is Building 60 is not a new or greenfield facility but rather an existing structure being retooled for 3D NAND. Fab equipment spending for this fab is expected to be high in 2018.Then there is Fab 42 from Intel. Construction started in 2011 before it was shelved. It is expected to begin equipping by end of this year, with equipment spending expected to be high next year.Other fabs built many years ago are still ramping such as Globalfoundries Fab 8 phase 3 (TDC) and D1X (module 1 and module 2). D1X is a research and development pilot, not a high-volume fab. And Globalfoundries’ plans for a second fab in Malta have been pushed out.Samsung in Austin has space for more modules, but there is no indication they will ever be added.The SEMI World Fab Forecast shows five smaller facilities either planned or under construction, but these have little impact in this U.S. fab construction trend.And that’s basically it! No more volume fabs!If we divide fab equipment spending into two categories – investment in new capacity versus upgrades – we see a declining trend for fabs adding capacity. See chart below. (Compare 2005-2011 with 2017-2019). If we look at 2017, 2018 and 2019, Globalfoundries, Intel, and Micron are the big investors in new capacity.This year 60 percent of all fabs are expected to invest in equipment to add capacity, but just one or two volume fabs (Micron and Globalfoundries) account for the bulk of this growth. Same story for 2019, with two volume fabs (Intel and Globalfoundries) representing the lion’s share of the growth. Strike the Intel and Globalfoundries fabs from the equation, and investments in additional capacity would fall below upgrade spending levels.Once these fabs have reached full capacity, additional equipment investments will significantly lag spending increases for upgrades, signaling the end of new fabs in the U.S.

The global semiconductor packaging materials market reached $16.7 billion in 2017. While slower growth of smartphones and personal computers – the industry’s traditional drivers – is reducing material consumption, the slowdown was offset by strong unit growth in the cryptocurrency market in 2017 and early 2018. Flip chip package shipments into the cryptocurrency market, while providing a windfall to many suppliers, are not expected to remain at high levels, SEMI, the industry association representing the global electronics manufacturing supply chain, and TechSearch International reported in The Global Semiconductor Packaging Materials Outlook.The outlook shows that, despite growth in automotive electronics and high-performance computing, continuing price pressure and declining material consumption will constrain future material revenue growth to steady single-digits, with the materials market forecast to reach $17.8 billion in 2021. IC leadframes, underfill, and copper wire are among the materials segments that will see single-digit unit volume growth through 2021.Laminate substrate suppliers participating in the sale of flip chip substrates for cryptocurrency saw volume increases in 2017, but this segment continues to be battered by increased use of multi-die solutions and the shift to wafer level packages (WLPs), including fan-out WLP, slowing growth. Wafer-level packaging (WLP) dielectrics and plating chemistry suppliers will experience stronger revenue growth as the adoption of advanced packaging continues. Over the next several years, advances in the semiconductor materials market will present a number of opportunities driven by trends including: Continued adoption of FO-WLP including FO-on-substrate solutions with high density geometries down to 2µm lines and spaces Liquid crystal polymer (LCP) under consideration as a possible material option because of its good electrical performance and low moisture absorption, especially for mmWave applications such as 5G Adoption of low-cost package solutions such as MIS and other routable-QFN technologies PPF QFN volumes are rising with automotive applications, driving a requirement for roughened plating to deliver needed reliability Expansion of photoresist plating capability for selective plating of leadframes Thermally enhanced and high-voltage mold compounds for power and automotive devices Thermally conductive die attach materials other than solder die attach for power applications Report highlights include: Laminate substrates represent the largest revenue segment of the materials market with more than $6 billion in sales for 2017. Overall leadframe shipments are forecast to grow at a 3.9 percent CAGR from 2017 through to 2021, with LFCSP (QFN type) experiencing the strongest unit growth, an 8 percent CAGR. Following five years of decline, gold wire shipments increased in both 2016 and 2017 though represent just 37 percent of the total bonding wire shipments in 2017. Liquid encapsulant revenues totaled $1.3 billion in 2017 with single-digit expected through 2021. LED packaging applications are driving the revenue growth over the forecast period though downward pricing pressures are a constant in the market. Die attach material revenues reached $741 million in 2017 with single digit growth to 2021. DAF materials will experience higher unit growth, though downward pricing trends continue. Solder ball revenues reached $231 million in 2017. The revenue outlook depends on fluctuations in metal pricing. The wafer-level plating chemical market was put at $263 million in 2017 with strong growth through 2021. RDL and Cu pillar will be the key growth segments. SEMI and TechSearch International, Inc. teamed up again to develop the 8th edition of the Global Semiconductor Packaging Materials Outlook, a comprehensive market research study on the semiconductor packaging materials market. Interviews were conducted with more than 130 semiconductor manufacturers, packaging subcontractors, fabless semiconductor companies, and packaging material suppliers to gather information for the report. The report covers the following semiconductor packaging materials segments: substrates, leadframes, bonding wire, mold compounds, underfill materials, liquid encapsulants, die attach materials, solder balls, wafer level package dielectrics, and wafer-level plating chemicals.For more information and to purchase the report, click here.